| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Engine/Hybrid System | Section: Engine Control | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000002GWC003X |
| Title: 2UZ-FE ENGINE CONTROL: CAMSHAFT POSITION SENSOR: INSTALLATION (2008 Sequoia) | ||
INSTALLATION
1. INSTALL VVT SENSOR
(a) Install the 2 VVT sensors with the 2 bolts.
Torque: 7.5 N·m (76 kgf·cm, 66 in·lbf)
(b) Connect the 2 VVT sensor connectors.
2. INSTALL INTAKE MANIFOLD
3. INSTALL NO. 1 FUEL PIPE SUB-ASSEMBLY
4. INSTALL NO. 2 FUEL PIPE SUB-ASSEMBLY
5. INSTALL EFI FUEL PIPE CLAMP
6. INSTALL NO. 2 WATER BY-PASS PIPE
7. CONNECT VACUUM HOSE ASSEMBLY
8. INSTALL AIR CLEANER HOSE ASSEMBLY
9. INSTALL CAMSHAFT POSITION SENSOR
|
(a) Install the camshaft position sensor with the bolt and stud bolt. Torque: 7.5 N·m (80 kgf·cm, 66 in·lbf) |
10. INSTALL NO. 3 TIMING BELT COVER SUB-ASSEMBLY LH
11. CONNECT NO. 1 RADIATOR HOSE
12. INSTALL DRIVE BELT
13. ADD ENGINE COOLANT
14. INSPECT FOR COOLANT LEAK
15. INSPECT FOR FUEL LEAK
16. INSTALL NO. 1 ENGINE UNDER COVER
17. INSTALL THROTTLE BODY COVER SUB-ASSEMBLY
18. INSTALL FRONT COWL TOP OUTER PANEL SUB-ASSEMBLY
19. INSTALL FRONT WIPER MOTOR AND LINK ASSEMBLY
20. INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY
21. INSTALL FRONT FENDER TO COWL SIDE SEAL RH
22. INSTALL FRONT FENDER TO COWL SIDE SEAL LH
23. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH
24. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH
|
|